Palo Alto Foothills Park

1,400 acre Foothills Park is open to Palo Alto residents and their guests. It consists of 15 miles of hiking trails, lake (fishing and boating is permitted), picnic and camping area. The land of Foothills Park was sold to city of Palo Alto by Dr. Lee founder of Palo Alto Medical Foundation in 1958 on the condition that it be preserved as open space.

Did you know that about half of California is prime mountain lion country! this link explains what you should do in case you encounter a Mountain Lion.

img_1908.JPG img_1913.JPG img_1914.JPG

Museum of Asian Art

img_1862.JPG img_1884.JPG img_1895.JPG

img_1897.JPG img_1885.JPG img_1903.JPG
Which movie character does this figurine resemble?

img_1876.JPG

Answer: V for Vendetta!!

Celerbrating Yalda night with our Persian friends

Shab-e Yalda is an Iranian festival celebrating the longest night of the year, that is on the eve of the winter Solstice (Dec 21st). On the night of the festivities, the fire keeps burning, water melon, pomegranate, and dried fruit are served, people recite poetry and play music and celebrate the rebirth of sun.
yalda-01.jpg yalda-02.jpg yalda-03.jpg

yalda-04.jpg yalda-05.jpg yalda-06.jpg

Yahoo 2007 Party

img_1716.JPG img_1725.JPG

img_1726.JPG img_1734.JPG

My Trip to Iran with a short stop at Amsterdam

img_1652.JPG img_1653.JPG img_1654.JPG

Zwarte Piet (meaning black pete) is a companion of Saint Nicholas in the Netherlands on his holiday travel when he distributes presents to all good children. The character of Zwarte Piet is increasingly controversial, which is often similar to blackface and can bring similar social consequences. It is funny how such characters that show a form of prejudice and promote negative stereotype are still common in countries like Netherlands.
img_1681.JPG img_1684.JPG img_1706.JPG

This is the newly built Metro in Tehran. At the moment it has three routes.
img_1699.JPG img_1700.JPG img_1705.JPG

I had a trip to Bazar Tehran shopping for a Tabriz rug!
img_1676.JPG

And here is our family complex building that my brothers are building.

What’s Next?!

Our next project would be the restoration of a stained glass window we brought from Iran years ago. It was sitting in Mammad’s uncle’s garage in Tehran and Toronto for years. It should be over 100 years old. This would be our winter project! We need to replace some broken glasses, clean and oil the wood frame and if everything goes well we would like to make a nice dinning table out of it. Or we will display it as an arts and crafts piece.

I think I need to register Mammad for a woodwork workshop soon. ;)

img_1636.JPG

Building a Pond!

After months of research we decided to take some action. Before I give you step by step explanation I would like to mention some useful resources in building a pond that helped us with our endeavor.
1. Pond Building for Hobbyists – Aquascape
2. Creating Japanese Gardens – ORTHO books
3. A Hobbyist guide to Pond Plants – Aquascape
4. How to design and build a water feature – DVD by smartflix.com
5. Pondkoi forum
6. Pond Forum (Graden Web)

First we drew the design of our pond on the ground. With the help of a hose we came up with the design that we liked and then we painted around it.

007.JPG 009.JPG

And we did the same thing for the second and third levels. The first level is about 8″ deep which would be for marginal plants that need 0-8″ of water, like Papyrus, Lizard Tail, …
The second level would be another 8″ deep (total 16″), which would be great for water Lilies.

img_1520.JPG

We left some parts as deep as 30″ for the fish to swim easily and also the depth would protect them from Egrets and Raccoons. If you want to have Koi in your pond you need to have the pond as deep as 3 feet.
The skimmer we used was Savio Skimmerfilter. The skimmer should be placed opposite the waterfall. We first dug a hole for the skimmer. It was very important that the opening of the skimmer be 7″ above the water level in the pond. Usually the water level would be 3″ below the ground level. To find the ground and consequently water level we put some wooden stakes around the pond and marked them with a level.

img_1522.JPG

Now the question is what kind of rock and how much of rock do I need for my pond? We decided to go with Napa, Sonoma and Cold Mountain rocks which are widely used by pond builders in this area. The practical point about Napa rocks is that they have lots of edges and this make them easy to stack. Sonoma is more round which is safer for the liner. Cold Mountain are great for the water fall and around the pond. To calculate the amount (#tons) of rock, we used following formula:

(Volume of first level in ft3): 27 (to convert it to yrd3) x 1.25 (to convert it to Ton)

17x5x8/12 : 27 x 1.25= 2.6 ton
So we ended up with about 4 tons of rock for inside the pond and some hardscaping around it. We bought 2 palettes of Napa rock (one double head and one baby head) and 1 palette of Sonoma rock (double head) and half a ton Cold Mountain rock and about 6 boulders.

img_1526.JPG

There is a big debate whether you should cover the whole liner with small rocks or not. One school of thought believes that by adding river rocks and gravels on the bottom of the pond, you generate some dead pockets and a massive amount of muck will be building up in those pockets. it also becomes more difficult to scoop/vacuum the debris. So we decided to avoid gravel and just cover the liner on the bottom of the pond with Lin Creek Pebbles (3-8 inches). This make it easier to clean the pond and healthier ecosystem.

After digging we covered the base of the pond with some sand.
img_1527.JPG

Then with carpet. We bought our carpet from home depot $0.45/sqft.

img_1531.JPG

After the carpet went the underlayment. You need to make as much padding as you can to avoid any damage to the liner.
img_1532.JPG

And finally the liner. We used 45mill EPDM liner.
img_1534.JPG

Here are some pictures of the pond with rocks in it, and of course the beautiful stone statue we brought from Bali.
img_1541.JPG img_1549.JPG

Building of the waterfall was not easy.The waterfall filter we bought was Savio Model F100. We built two levels with concrete blocks. Two pieces of Cold Water rocks went on each level to make a 5″ drop for the waterfall. We were very concern about the noise of water because of being too close to the neighbors. But it appeared that the noise level is fine. No complaints yet!
img_1543.JPG

The next step was to power wash the rocks and decide on the place of the plants inside and outside of the pond. For the inside of the pond we decided to plant the plants in fabric pots made of felt. We bought our pots from The Water Garden. Some plant them directly in the pond but we decided to go with the pot since it will be easier to remove the plants from the pond and also would be cleaner for the pond. Here is the list of the plants we used for inside the pond:

1. Hardy Water Lilies: Black Princess (Red), Joey Tomocik (Yellow), Peach, White.
2. Marginals: Papyrus, Horsetail, Lizard tail, Rush, Pennywort, Watercress, Water Mint, Tulbaghia, Iris
3. Floaters: Water Hyacinths, Water Lettuce, Red Stem Parrot Feather
4. Oxygenators: Hornwort, Cabomba, Anacharis, Red Ludwigia, Vallsneria
img_1552.JPG img_1555.JPG

And here is the result of two months of hard work on weekends and lots of research. It is so rewarding. I can’t say how much we enjoy our pond. When we add the lights I will post some more pictures of the pond at night. Now we need to be patient and let the pond to establish its Nitrogen cycle. We added some beneficial bacteria to help with the cycle. Also, we added some goldfish. They are so cute. We may consider Koi later on!

And here is the moment of Zen!
img_1585.JPG img_1581.JPG img_1588.JPG

Within the first week the lily started blooming!

pond.jpg lily.jpg

Your House As Seen By:

Yourself …

image001.jpg

Your Buyer ….

image002.jpg

Your Lender …

image003.jpg

Your Appraiser …

image004.jpg

Your Tax Assessor …

image005.jpg

Making of the Water Feature

Since the Tara stone statue was very heavy we needed to make a concrete platform to hold it. We also decided to have the statue a bit above the ground. This is a disappearing water feature, meaning the water will fall from the vase that Tara (the stone statue) is holding, disappearing in the ground covered by rock stones. The trick is that the pump should be down in the ground topped with a grate to protect the pump from the crushing forces of the rocks.

We needed to make a shelf around the concrete platform to secure one side of the grate on it. Therefore, we made the step in two phases. As a result we used rebars to reinforce the bondage of concrete.

waterfeature-01.jpg waterfeature-02.jpg waterfeature-04.jpg

We made a smaller wooden frame for the top, same as we did for the bottom one. This is the concrete step after it is done. Looks like an Olympic step!
waterfeature-05.jpg waterfeature-06.jpg
Then it was time to frame around the platform. We used two half concrete block on each side. The good thing about them was the openings inside them so that the grate could easily sit on it. we sloped the inside of the hole so that the water would flow smoothly to the front, where the pump sits. For the grates we looked into everything from drainage grates to grill grates. But the most practical and economical we found were the closet shelves from home depot!

waterfeature-07.jpg waterfeature-08.jpg

The next step was to place the underlayment followed by the liner. We used 35 mil liner which was thick enough for this size water feature. We covered the edges with some paddings underneath the underlayment to protect the liner.
waterfeature-09.JPG waterfeature-10.JPG
We had a bit of a struggle with installation of the statue. The hole in the back of the statue was lower than the one in the vase (sloped backward), so when the water would flow back in the hole around the pipe and leaked from the back of the statue. To solve this problem we sealed around the hole with concrete and transparent silicone. Seems it is now working. We also took a trip to Lyngso to purchase some rocks. Mammad was in favor of the bigger ones and I was leaning toward the smaller ones. So, we ended up with a very nice selection of rocks. The ones with moss on them are so cool. With a sprinkle of water on them the moss came back to life. The other thing we did was installing a timer for the pump and also for the lighting.
Now that the patio is fully functional, all you need to do is to sit under the Gazebo in front of the water feature and enjoy the sound and beauty that resembles Bali. Salamat Pagi!

waterfeature-11.JPG waterfeature-12.JPG waterfeature-13.JPG

waterfeature-14.JPG waterfeature-15.JPG

A little bit about Tara

Tara, a female Buddha and meditational deity, is arguably the most popular goddess in the Buddhist pantheon. She is considered to be the goddess of universal compassion who represents virtuous and enlightened activity.Tara was once just an ordinary person, but after many lifetimes of practicing the Bodhisattva Path, Tara attained perfect enlightenment and vowed to stay and help all other creatures on their paths to enlightenment. The interesting thing about Tara is that she vowed not only to be a bodhisattva, but to do this in the form of a woman. Typically, in Buddhist thought, a Bodhisattva takes the male form. Tara’s vow is striking because it went against traditional teaching. Her inspiring independence, along with many other qualities, has lead her to be perhaps the most popular Bodhisattva in the Buddhist tradition besides Avalokitesvara.

My Blooming Cacti

img_1486.jpg img_1484.jpg img_1485.jpg